KC’s Services & Pricing

Services & Pricing

SLIDES AND BARRELS
1. Fit slide to receiver 250.00
2. Fit oversized match barrel, bushing, link and pin (Labor Only) 275.00
3. Lower ejection port (Refinishing at additional cost) 75.00
4. Provide and fit new barrel bushing 75.00
5. Marvel disconnector cut in slide 50.00
6. Laser welding receiver (price determined by job)

SIGHTS
1. NM adjustable sight set, CMP legal includes refinishing in black park 250.00
2. RRA Optics slide mount with installation 140.00
3. RRA full coverage slide mount with installation 155.00
4. Integral Aimpoint Micro slide mount cut 250.00

TRIGGER WORK
1. Trigger job (Quality parts, if needed, at additional charge) 125.00
2. Install and fit new trigger (Labor Only) 25.00

SAFETIES
1. Install beavertail grip safety & refinish receiver in black park 150.00
2. Install single side thumb safety (Labor Only) 25.00
3. Install ambi thumb safety (Labor Only) 50.00

OTHER ODDS AND ENDS
1. Fit extended ejector 45.00 (plus part)
2. Refit and tune your extractor 45.00
3. Provide and fit EGW high magazine catch 75.00

SMITH AND WESSON MODEL 41
1. Trigger job 75.00
2. Modify ejector/slide stop 25.00
3. Tighten bolt in slide, true bolt face & set bolt alignment 100.00
4. Adjust / Time trigger bar 50.00

CMP HARDBALL .45
I will hand fit the slide to the receiver and install a national match barrel. Lower the ejection port, fit an extended ejector and tune the extractor for positive and consistent operation. Fit a new trigger and set the trigger pull to a legal 4 pounds with the Marvel disconnector cut in the slide. National Match adjustable sights will provide the best possible sight picture. A beavertail grip safety will be perfectly blended into the receiver. The front strap will be checkered at 20 lines per inch. Two magazines will be fit to the pistol for reliable functioning, and the pistol will be finished in a matte manganese phosphate.

The price for this package is $4000.00

NON-REFUNDABLE deposit of $1500.00 required with signed estimate
Roll trigger job additional $200.00
Price does not include shipping

NRA WADCUTTER .45
I will hand fit the slide to the receiver and install a national match barrel. Lower the ejection port, fit an extended ejector, and tune the extractor for total reliability. Fit a new trigger, long or short (your choice) and set the trigger to a clean 3 1/2 pounds with the Marvel disconnector cut in the slide. I’ll checker the front strap at 20 lines per inch for a good grip. The slide will be set up for a slide scope mount. The whole gun will be finished in a matte manganese phosphate. Two magazines are fit and provided with the pistol.

The price for the above package is $4000.00

NON-REFUNDABLE deposit of $1500.00 required with signed estimate
Integral Aimpoint Micro slide cut $250.00
Roll trigger job additional $200.00
Price does not include shipping

Dedicated Lower for 22 Conversion
New lower receiver built and tuned to your conversion for the ultimate in reliability. Checkered front strap and mainspring housing at 20 LPI. Trigger of your choice for length. Modified magazine catch to ensure reliable feeding and function. Trigger job complete with your choice of pull weight.  The completed lower will be finished in a manganese phosphate.

The price for the above package is $1350.00

NON-REFUNDABLE deposit of $500.00 required with signed estimate
Roll trigger job is an additional $200.00
Price does not include shipping

Poor Man’s Beretta
On YOUR pistol, I will fit a new KKM match barrel and install a set of NM sights. Rework the trigger to a clean 4 pounds and have you ready for the next leg match.

Price for the above package is $800.00

Additions to enhance your Beretta package:

Extreme Engineering trigger kit for a long lasting consistent pull is an additional $190.00
Wilson Beretta Trigger Bar kit to add even further to the trigger pull $85.00
DJ Precision trigger shoe $40.00

NON-REFUNDABLE deposit of $500.00 required with signed estimate
Deposit of $500.00 is required to start work
Price does not include shipping or sales tax

Need to get in touch with me?  Please fill out the form below.

You are in landscape orientation.

You are in portrait orientation.


You are definitely on a small screen.

You are definitely on a medium screen.

You are on a large (or larger) screen. Foundation 6 got lazy and did away with the extra-large sizes, but still left the breakpoint at the high end of large, meaning that this disappears if you leave it at .show-for-large-only...

Well, for the .show classes, anyway. The .hide-for-large doesn't have that limit