Kodiak 9000 & 30mm Slide Mount

Kodiak 9000 & 30mm Slide Mount

$225.00

3 in stock

Category:

Description

At the request of the AMU, Kodiak developed a slide mount for the Aimpoint 9000.  That original design has been modified to accept other 30mm dots such as the Ultra Dot.

It fits the original Bo-Mar screw pattern for the rear three holes.  A new hole will have to be drilled and tapped for installation of the front mounting screw.

NOTE:  This mount uses #8 screws.  If you are replacing a slide mount on your gun you will have to open up the screw holes from a #6 to a #8 and tap them to a new size.

Reviews

There are no reviews yet.

Be the first to review “Kodiak 9000 & 30mm Slide Mount”

Your email address will not be published. Required fields are marked *

At the request of the AMU, Kodiak developed a slide mount for the Aimpoint 9000.  That original design has been modified to accept other 30mm dots such as the Ultra Dot.

It fits the original Bo-Mar screw pattern for the rear three holes.  A new hole will have to be drilled and tapped for installation of the front mounting screw.

NOTE:  This mount uses #8 screws.  If you are replacing a slide mount on your gun you will have to open up the screw holes from a #6 to a #8 and tap them to a new size.

You are in landscape orientation.

You are in portrait orientation.


You are definitely on a small screen.

You are definitely on a medium screen.

You are on a large (or larger) screen. Foundation 6 got lazy and did away with the extra-large sizes, but still left the breakpoint at the high end of large, meaning that this disappears if you leave it at .show-for-large-only...

Well, for the .show classes, anyway. The .hide-for-large doesn't have that limit